Common Problems With Sprinkler Controllers And How To Fix Them
Until things get out of hand, sprinkler controllers are your best buddies. There is no greater nightmare than having your sprinkler controllers develop a problem that you do not understand. At this time, you must contact a lawn sprinkler repair service.
In this post, we will examine the five most likely problems you will find with your sprinkler controllers and how to fix them. Repairing lawn sprinkler controllers might be a bit unsightly, but we will do our best to guide you through repairing the following frequent sprinkler issues:
The inactive controller
The inactivity of a sprinkler is the first of the most common problems it can present. This condition can lead to a great deal of confusion, as you may not know whether to call a sprinkler repair agency or simply tap on the sprinkler until it resumes operation.
Imagine you have set all of your watering times on a new sprinkler controller system and then left it alone. The rain should have started hours ago, but nothing has happened.Your irrigation system has been thoroughly inspected for leaks or obstructions, but you have not found any. You are already considering contacting a lawn sprinkler repair company.
Even though your sprinkler is designed to run at a specific time, it will not operate if the controller is not set to auto. The settings will take effect only when the controller is set to auto. There is no requirement for sprinkler repair; only a few buttons are required.
The blank display
Your sprinkler controller system may have encountered a service disruption at some point, causing it to become inaccessible. When this occurs, your sprinkler will turn off, and even if power is restored, it may not turn back on.
When this occurs, there are many repercussions, including the loss of all settings and the deactivation of the complete sprinkler system. At this point, it would seem sensible to contact a lawn sprinkler repair service, but you can fix the issue on your own.
Simply locate the reset button on your sprinkler controller, which is typically a little button reversed on its side. Use a thin object to prop up the screen until it comes to life. There you go, your display is no longer blank.
The off-scheduled watering.
What could be more upsetting than returning home from work to discover that your sprinkler did not water your lawn as scheduled? If your system is watering when it shouldn't be, the manual override key may have been pressed by accident.
Turning the dial to the off position for a minute or two and then resetting it to run is the simplest solution to this problem. If the problem remains, examine the watering schedule for an unwanted planned time and eliminate it. If you keep having the same problems after trying all of these fixes, you will need to call a company that fixes lawn sprinklers.
Valve malfunction
Typically, this occurs when the run time or watering duration time has not been established. This can be remedied by turning the controller dial to the appropriate valve. Use the up and down buttons to set a duration time if the run time field is blank.
If, on the other hand, the alarm light comes on or an error message shows up on the controller's screen, it could be a problem with the valve solenoid that needs the irrigation wire to be replaced.
In manual mode, the controller will not run.
It is possible that your sprinkler controllers will not switch from automatic mode to manual mode. If this occurs, there is no need to be alarmed. Just reset the system to turn it off, and you should be back to the real system where you can slowly get out of auto mode.
You have this covered! You can independently troubleshoot your sprinkler controller system.
