How To Install An In-Ground Sprinkler System
One of the lesser-known keys to lush grass is regular watering. Install a lawn irrigation system to achieve this. In order to install a sprinkler system, many homeowners engage a professional contractor because it might be difficult to finish the job on your own.
Underground sprinklers are great for water conservation and water system savings. Installing underground lawn sprinkler nozzles and systems can be difficult, but with the correct preparation and resources, it's doable.
You can install your own sprinkler system and save money on labor with the appropriate direction and minimal experience. Learn everything you need to know to start and decide if you need a Jacksonville, FL, irrigation firm for sprinkler system installation.
A Guide to Installing an In-Ground Sprinkler System
The subsurface sprinkler can be programmed to water the lawn on a regular schedule, saving you from having to get the hose and sprinkler. An adequately planned sprinkler system ensures every green area is included, preventing dryness or overwatering. Programmable sprinklers make it easier to maintain a lush, green yard and save money by not wasting water.
The in-ground system installation process is described below.
1. Plan installation
Be sure to arrange the sprinkler installation. Find every cable, gas, and electrical line. Avoid damaging internal circuitry. Prepare the sprinkler's lawn range and operation. Understanding lawn sprinkler nozzle types will help you get optimal coverage.
2. Dig trenches.
Next, dig trenches for water pipes. Determine where to install the sprinkler. If you already have sprinklers, replacing the head is easier. Trenches should be deep enough to easily hold the pipes without compromising pressure.
3. Connect the water.
After digging trenches, install pipes and connect water. PVC pipes connect to the water supply. Call a competent irrigation company to install and connect the pipes to the water supply.
4. Fitting zone valve
Zones will have separate sprinkler heads. Sprinkler valves should be assembled on the ground and connected to subsurface pipes. Run 1-inch schedule 40 PVC pipe from the main water line to a backflow prevention device and then to the manifold. The wires from the sprinklers leading to the valve should be connected.
5. Join pipes to the valve box.
Next, install and connect the pipes to the valve box. A 90-degree PVC pipe may be needed to twist and turn each pipe's ends. This technique is simple and quick. After this, turn on the water to clean the pipes. It will clear and improve the sprinkler's route.
6. Install sprinklers.
Start here after removing debris and turning off the water. Install sprinkler heads and nozzles in their designated locations. After finishing one sprinkler, move on. Water waste and inefficiency can occur from loose connections.
7. Connect to an automatic timer
The automatic sprinkler wire must be laid out. Then link the sprinkler system to time. Sprinkler repair and installation experts can connect the timer. Schedule watering at regular intervals to avoid worrying about it every time.
8. Check the sprinkler system.
Testing your newly installed sprinkler system is the final stage. Once you turn on the water and inspect the sprinkler operation, you may discover faults. If you replaced sprinklers, inspect the irrigation system to make sure they operate.
As shown above, installing your own grass sprinkler framework is a major undertaking. If you're unavailable, don't worry. Hiring a professional who can finish the job without problems or costly mistakes is smarter.
