How Much Oil Does a Troy-Bilt Pony Riding Mower Take?

Troy Bilt Pony Mower is very good for mowing an average sized lawn. It has 42-inch mowing deck and a good engine. To keep Troy Bilt Pony engine and all moving component lubricated and at top performance, you need to change the oil. Before you change the oil, you need to know oil capacity, type of oil and best practices to care for the engine.

Our Top Picks

Shop: Briggs & Stratton 100005 SAE 30W Engine Oil – 18 Oz at Amazon

Best for 40°-100° F temperatures

Air-cooled 4-cycle engines

Shop: SAE 10W-30 Motor Oil at Amazon

Temperature range – 20° to +100° F

Best for winter

Shop: Synthetic SAE 5W-30 Motor Oil at Amazon

Temperature range – 40° to +120° F

For temperature never consumes oil efficiency

Shop: SAE 5W-30 at Amazon

Reduce engine deposits and exhaust emissions

Shop: Vanguard 15W-50 at Amazon

Synthetic oil

Best for commercial equipment

troy bilt oil change, troybilt pony mower, troy pony, how much oil to put in a lawn mower, what kind of oil does a lawn mower take, troy pony, how much oil does a push mower take, lawn tractor oil, troy bilt pony 42 riding lawn mower, how much oil to put in lawn mower, troy bilt mower engine, troy built riding lawnmower, lawn mower engine oil type, what kind of oil goes in a riding lawn mower, how much oil do you put in a lawn mower, craftsman riding mower oil change, what type of oil do lawnmowers take, troy bilt 13an77kg011, what kind of oil does a push mower take, what kind of oil goes into a lawn mower, troy bilt 48 inch mower, troybilt ride on mower, what kind of oil does my lawn mower take, what type of oil for craftsman riding lawn mower, craftsman riding lawn mower oil change, oil for lawn tractor, troy riding lawn mowers, engine oil capacity, best motor oil for lawn mowers, what kind of oil does a craftsman lawn mower use, motor oil for lawn mowers, what kind of oil goes in a push lawn mower, what kind of oil to put in a lawn mower, best motor oil for lawn mower, what grade oil for lawn mower, oil capacity

Troy Bilt Pony Oil Capacity

Troy Bilt Pony oil capacity is based on biggs and Stratton 17.5 HP Intek Engine model. This engine has 44-ounce oil capacity. If your intek model has an oil filter on it, the capacity increase to 48 ounces.

Troy Bilt Pony Oil Type

To keep the Troy Bilt Pony engine at top performance, choose the type of oil based on outdoor temperature your mower used. If the outdoor temperatures 50 to 104 degrees Fahrenheit, SAE 30 is advised. Use 10W-30 for -4 to 100 degrees, and 5W 30 for 32 degrees and beneath. You can use synthetic 5W-30 for all operating temperatures.

You can find the best SAE for Troy Bilt Pony from your operational manual description with what type of oil is recommended.

Check the oil level

Before changing the oil, you need to check the oil level of the Troy Bilt Pony engine. Check oil level every ten hours of use, or before using the pony mower. to check oil level, find the oil fill cap on the right side of the engine. Pull out the dip stick and see the oil level as indicated by oil on the dip stick. If it is at the "full" line, no need to change the oil or add oil as needed. Otherwise, if the oil mark is halfway between low and full line, you can fill with roughly 24 ounces

Troy Bilt Pony Oil Change

You need to change Troy Bilt Pony oil each 50 mower hours. You can change oil by removing oil fill cap and the dip stick. Lose the drain port located under the oil dip stick. Let to oil flow to the bucket. When the oil is draining out, put the drain plug and tighten up, and refill with new oil.

Best Oil For Troy Bilt Lawn Mower

Best Hover Mowers Review